SR1.60

up to 170 kg.

SR1.60

SR1.60​ - Electromechanical operator with one motor and aluminium crown gear for the automation of balanced rolling shutters up to 170 kg.
SR1.60E​ - SR1.60 Including electric brake SRE.X1.
SR1.60​EC - SR1.60 Including electric brake SRE.X1 and 4-metre cable.

  TECHNOPOLYMER FLANGE​

*    42/48 mm shaft diameters with KSR60.42/KSR60.48 accessories.

  • Innovative technical solutions

    The high-performance technopolymer flange distributes the radial load better. Compared with the solution with bearings, it can support very high axial loads and is extremely reliable even in situations where installation is difficult or balancing is not good.
  • Quick installation in three steps

    Designed for roller shutter manufacturers, it can be installed easily in just a few steps. To install SUPERBE, just make a hole through the shutter tube, insert the motor in the tube and then fasten it.
  • Unique performance

    The thicker steel gear and roller shutter crown gear ensure maximum grip.
  • Self-learning of limit switch positions

    The new limit switch, with quick connections and integrated electric brake power supply, enables automatic adjustment during the opening and closing phases.
Base SR1.60​
Including electric brake SR1.60E
Including electric brake and 4-m cable SR1.60EC
Motor supply 230 Vac 50/60 Hz
Max absorbed current 3.1 A
Absorbed power 690 W / 720 W with SRE.X1
Maximum torque 170 Nm
Capacitor 20 μF
Max roller shutter stroke 8 m
Opening speed with no load 10 r.p.m.
Limit switch Automatic
Operating temperature -20 °C ÷ + 50 °C
Protection rating IPX0
Electric motor insulation class F
Max roller shutter surface area 22 ㎡
Max balanced roller shutter weight 170 kg
Roller shutter axis diameter 60 mm (42/48 mm)*
Pulley diameter 200 / 220 mm
Lubrication Grease
Weight 5.4 kg

UP / UP-C

Dead man control panel.

KFACILE

230 Vac Control Panel.

DREAMY

230 Vac Control Panel.

KSR60.42

Reduction kit for 42 mm diameter.

KSR60.48

Reduction kit for 48 mm diameter.

SRE.X1

Electric brake for PS1.60 and PS1.76.

CABLE 4m

Cable 4 m.

BL.BS

Manual and electric controller.

BL.C

Key for BL.BS.

Have you got any doubts or would you like to inquire about this product? Please write your question here and our operator will provide you with an answer as soon as possible.
@

Strengths

  • Innovative technical solutions

    Innovative technical solutions

  • Quick installation in three steps

    Quick installation in three steps

  • Unique performance

    Unique performance

  • Self-learning of limit switch positions

    Self-learning of limit switch positions

https://www.automatismicab.com/images/media/md_14c7fe9c8a744d019e46b4d07bf99049.png Via della Tecnica, 10 Z.I. - 36010 - Velo D'Astico (Vicenza) ITALY info@automatismicab.com +39 0445 741215 +39 0445 742094