SR2.60
up to 320 kg.
-
60 mm -
Max 320 Kg. -
2 Motors
SR2.60
SR2.60S - Electromechanical operator with two motors and aluminum crown gear for the automation of balanced rolling shutters up to 320 kg.
SR2.60SE - SR2.60 Including electric brake SRE.X2.
SR2.60SEC - SR2.60 Including electric brake SRE.X2 and 4-metre cable.
TECHNOPOLYMER FLANGE
* 42/48 mm shaft diameters with KSR60.42/KSR60.48 accessories.
-
Innovative technical solutions
The high-performance technopolymer flange distributes the radial load better. Compared with the solution with bearings, it can support very high axial loads and is extremely reliable even in situations where installation is difficult or balancing is not good. -
Quick installation in three steps
Designed for roller shutter manufacturers, it can be installed easily in just a few steps. To install SUPERBE, just make a hole through the shutter tube, insert the motor in the tube and then fasten it. -
Unique performance
The thicker steel gear and roller shutter crown gear ensure maximum grip. -
Self-learning of limit switch positions
The new limit switch, with quick connections and integrated electric brake power supply, enables automatic adjustment during the opening and closing phases.
| Base | SR2.60S |
| Including electric brake | SR2.60SE |
| Including electric brake and 4-m cable | SR2.60SEC |
| Motor supply | 230 Vac 50/60 Hz |
| Max absorbed current | 5.4 A |
| Absorbed power | 1045 W / 1075 W with SRE.X2 |
| Maximum torque | 320 Nm |
| Capacitor | 16+16 μF |
| Max roller shutter stroke | 8 m |
| Opening speed with no load | 10 r.p.m. |
| Limit switch | Automatic |
| Operating temperature | -20 °C ÷ + 50 °C |
| Protection rating | IPX0 |
| Electric motor insulation class | F |
| Max roller shutter surface area | 32 ㎡ |
| Max balanced roller shutter weight | 320 kg |
| Roller shutter axis diameter | 60 mm (42/48 mm)* |
| Pulley diameter | 200 / 220 mm |
| Lubrication | Grease |
| Weight | 9.3 kg |
 | UP / UP-CDead man control panel. |
 | KFACILE230 Vac Control Panel. |
 | DREAMY230 Vac Control Panel. |
 | KSR60.42Reduction kit for 42 mm diameter. |
 | KSR60.48Reduction kit for 48 mm diameter. |
 | SRE.X2Electric brake for SR2.60 and SR.2.76. |
 | CABLE 4mCable 4 m. |
 | BL.BSManual and electric controller. |
 | BL.CKey for BL.BS. |
Have you got any doubts or would you like to inquire about this product? Please write your question here and our operator will provide you with an answer as soon as possible.
